Quote:
Originally Posted by wiedemab
Very cool... I have a "Stielow" rear housing with C5/6 mounting surface as well. I'm not sure it would would work out with the C7 rear brakes (doubtful). I already have quite a bit invested in the SKF bearings etc. (had I known the C7 bearings were really the way to go...but hindset)
I like the idea of the lower cost brake options. I may end up running C6 Z06 stuff to start with.
This is certainly a great option.
|
No you are right, the Stielow version that you have will not work with the latest C7 brake set-up. It is specific to C5/6. Many little differences....
As for the SKF hubs that you have invested in, they are as good as they get as far as Corvette style hubs go. I utilize the C7 SKF hubs because they are identical in strength to the units you have, but the cost is much less. They are a direct replacement for the ones you have except the electronics differ IF you were planning on running ABS. As you probably know, you have a solid set-up there either way!
I really like the ZO6 stuff as well. VERY cost effective for what you get. Good luck with your project. I am a fan of your work and will be watching!
Jay