Oil pan is on for good and bottom of motor is buttoned up.
Top side has pushrods measured and installed as well.
Started making brake lines. Had to order a lot of fittings specific to the application. Spent more time than I'd like to admit trying to flare the brake lines.
Then started trying to flare. It didn't go well.
Finally got it figured out and finished up the rear lines
I have the flex lines now to finish off the run to the calipers and will do that when I get back to the back to finish up the brakeline from the master (this weekend).
Also had a scratched to hell diff fill cap. Took 30 minutes and sanded out the gouges and ended up with a brushed finish.
