Here is the update. I have the Holley electric fuel pump. The directions for the ECM said to take the power supply wire for the fuel pump and attach it directly to the power wire on the pump. I have it going to a 40 amp switch. Right now there is no power going to the fuel pump wire. The little red light is on in the fuse relay panel but all the fuses are good. When I pull the ignition relay out the red light goes away and the MAF shutters for a second. When I try other relay's the same effect occurs. I have zero codes.
I have run power to the pump and it works.
Thanks
https://lateral-g.net/forums/showthread.php4?t=44704