Quote:
Originally Posted by Bowtieracing
I have same system wich I bought many years ago. My car is still on project stage so I cant say anything on codes. How do you measure correct oil level?
|
I talked to Peterson and they said fill the system till the tank is 3/4 full while running.
I bought 3 gallons of oil. I used a welding rod to measure how deep the tank is, marked the rod where the top of the tank was, then measured where 3/4 full of that volume was on the rod. I used an oil primer to prime the motor since it was a new crate motor. You can also pull the coil pack connectors and turn motor over to prime.