Quote:
Originally Posted by Zoomin
Hey Tom,
I'm in the process of trying to get my Wilwood parking brake cable hooked up as well. Have you got a picture from the opposite direction?
I assume you're using the stock parking brake pedal setup - I'd like to see how you hooked that up to the cable block since the threads are different pitch. Also, how the spring is hooked up on the far end.
Thanks
|
Yes, I am using the stock e-brake setup...there is no pedal on a 1st/2nd gen. Nova. There is a handle under the dash that you pull out. The cable has a lead ball on the other end that hooks into a socket on the arm...The spring you see in the picture is the return spring for the cable...
What I did was drilled the threads out of the Wilwood brass block. I put a nut on both sides, so the block can slide along the length of the stock adjustment rod.....
T,