Quote:
Originally Posted by Vince@Meanstreets
Paul, From What I have found the problem is the angle of the forward supports (the last picture). I have cut and re-welded this section after the sides are flush. And it does help having up pressure instead of side pressure from the clamps. Drill then loosely bolt one hole and at a time this will help get all the holes to align. Do all the horizontal ones first then do the sides.
Another thing I have been doing is feeding a bolt into the frame and using a nut on the outside instead of the self tapping screws supplied. I have had customers strip them out checking for tightness. Works much better.
|
Vince Thank you so much I will look to do the same with feeding the bolts into the frame. I have heard of other having issues with the self tapping getting stripped