Thread: Hyperco dealer
View Single Post
  #7  
Old 03-30-2016, 10:41 AM
XTRMEASURES's Avatar
XTRMEASURES XTRMEASURES is offline
Senior Member
 
Join Date: Nov 2005
Posts: 212
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thans for the response thats one of the reasons i love this place.

I had tried without the spacer at first but it sat to low. With the spacer it sits at the ride hight i'm after. I figured with a 14'' spring it would help me with that plus give me some more travel. When i had the spacer off i had the retainer as for as i could go but the truck sat to low and my camber was off.

Yes sir i understand no matter how long the springs are 750# is still 750# thats why when i do get new springs i was going to go down spring rate also.

This is the truck in question as you can see if i do bottom out the tires will hit the inner finder wells which the only time I've bottom out is with my wheels turned all the way and i hit a pothole. Thanks again


__________________
A man that's motivated will find a way.
PROJECT'S
1984 GMC swb truck
1972 Camaro
2013 GMC truck
Reply With Quote