Quote:
Originally Posted by CamaroAJ
I used the DeVille wiper transmission arms and ball studs to get rid of the stock steel clamp so that the system operated quiet and smooth. I did it almost 4 years ago so I don't remember all what I had to do other than shorten them and twist one of them. I do remember that I built the whole system using the stock long arm cut in half and installed it onto the car and welded a rod between the cut parts to get the correct arm length. You can kinda see it on the top arm on the left side of the first picture.
 |
AJ, are the part the wiper arm connects to ( not sure of what they call it) still the Camao part or are they Deville too?