Quote:
Originally Posted by Shiner
Outer: 1"
Inner: 2"
Section Width 11"
Weld recommended I go with a 6.1 and run .25" spacers if I need to.
|
How many inches to that shock bracket to your current tire?
I am measuring 4 7/8" from the wheel mounting flange to the edge of the mounting stud and a radius of 7" so a 14" circumference. The inside of an 18" wheel is 17 3/4 so I believe you should be good. Also depending on lower shock mounting type. I can see that reducing the gap by an additional inch. Another good reason to got to a DSE OR Ridetech rear coil over system.
good catch guys.