Quote:
Originally Posted by jonkiwi
GMJim@HDC - I'm just in the process of installing a Tremec T56 Magnum in my 67 Camaro and am trying to decide on best shifter position and which Hurst stick to use. I think the Retro Roundbar part #6869RS is the right way to go but was looking for some specs before ordering. Hurst Drivelines seems to be the only one that offers this specific Hurst stick but has no specs on website and calling customer service was no help.
Your previous post said 9-1/4" long. Do you know the setback dimensions as well? Also is it offset like the Hurst 5384106 which was the other stick I was considering?
Also, if anyone on this thread has advice as to using the rear or mid mounting position for the shifter it would be appreciated. My Camaro has no console so not limited by that, but want to get it right before cutting the trans tunnel and carpet.
|
The round bar p/n 6869RS would not be the correct stick to go with. You will probably be better off with the
H5384106, which is the one that we recommend for a 67-68 Camaro. Below are the specs on the round bar if you were curious. Also, you will either be in the furthest rear position or the 180 degree flip forward but not the mid mount. If you have any questions, give us a call at 707-544-4761 and ask for Scott at ext. 449.
