Jody,
I've talked to Tyler 2-4 times a week for the past few weeks. I am using the full recommended setup. The 12 in Mcleod clutch with Mcleod P/P using the Mcleod SFI bell. I got all of this info from ATS so that is why I went with this setup. I am new to the whole clutch thing, so I was looking for a recomendation.
I called again to verify that nothing needed to be checked with a dial, shimmed, etc. and was told it all slides in with no fuss, as it did. He never said it and I didn't ask, but I'm sure he's used this setup or he wouldn't have never recommended it.
Now if its not air in the lines, I am back to square one with no idea what's up. The T/O doesn't touch the fingers until right before it touches the floor, about 1/16-2/16 before clutch stops.
Kerry
|