[will69camaro]

Sorry for the delay. Finally put in a solid weekend in the garage and knocked out a LOT.

• Fuel system wiring completed
• ECU wiring completed
• Engine Wiring Completed (aside from Plug Wires)
• Catch Can mounted and started plumbing
• Coils mounted
• Turbo Oil Feed complete
• AC condenser re-installed c/w heater hoses (need to get A/C lines built)
• Heater hoses run from firewall to waterpump

Remaining items to start it:

• Run the keyless start wiring and mount the box
• Complete plug wires when correct terminations arrive
• Complete PCV system when additional fitting arrives
• Hook up and bleed clutch line
• System test on fuel system
• Mount battery
• Make Startup Tune
• Install Radiator and hoses
• Temp wire fan

Only a few pics, I didnt' take much tim to take pictures this weekend. Need to do a serious clean on the garage after this wiring. It's filthy...

p.s. You wont see the coils with the fenders on and those hoses will run in the fender and out the front so not as noticable. I plan to start it without the front end on so we can closely watch for leaks.