Quote:
Originally Posted by Sheck44
Will
Not bad at all .. see the 2 set screws at the bottom of each end, remove these completely. Peel the tape off without touching the adhesive side and simply slide the computer portion out of the frame.
I lightly sanded the frame with the scouring pad for adhesion
The fit is VERY tight so mask off everything except the top 'exposed' portion of the frame.
OH !! just saw that build was you ... truly over the top my friend, looks like we are trading some ideas. Ya, the controller sticks out like a sore thumb.
Cant wait to see what you come up with for the rest of the interior
Cheers
Steve
|
Excellent, I'll try to pull it apart this week and see if i can get it free for coating.
And thanks for the compliments. Interior is fairly simple as I wanted it to appear primarily stock. It will have aftermarket seats, stock rear seat, standard door panels and the DSE dash center. I'm looking at console ideas as I like a console in the car but have nothing for it currently and not huge on the stocker.
Any tips on how you made that one? Looks awesome. I'd probably replace the radio in mine for the holley touch screen display.