The Heidt’s rear suspension bolts to the stock Camaro frame rails. In this pc, the upper control arm and upper shock mount brackets are set in place, loosely held by the rear axle bump-stop bracket. Holes will be drilled in the rail and the floor to secure these in place.
Here, the driver side bracketry is bolted in place. Note how the upper control arm bracket bolts through the floor.
[img]http://v8tvshow.com/V8TV_2/images/CPG_Camaro_5/1969_Camaro_CPG_09-17-15_012.jpg/img]
The bolts protruding through the floor appear a little long, we’ll install shorter bolts when we complete the final assembly of the car.
The upper control arm bracket features a little “kick-out” bend to allow for the nut to be installed on the upper arm bolt.
The rear sway bar crossmember is bolted to the upper rear brackets.
