[MCB Matt]

Originally Posted by randy

if you want to rekey your ignition to match all of your other locks follow these instructions.There's a metal clip inside the cylinder, pop the cover off and you will see 6 springs, take the springs out then you have 6 y shaped clips with diff height notches in them. Take them out and like the notches back up with the new key using a blank lock, take the y clips back out remembering what order in the cylinder and reinstall the springs and cover and your done. Now i have 1 key for my glove box, door locks, trunk and to start my car.

Another option, the new lock "kits" come with all the locks, gaskets, retainers AND are all keyed alike!

I enjoy re-keying, I learned it from my father, but in the case, especially if a few could use replace, the new set makes sense and is not very expensive.

Matt