Get to work ...
Hi All !
Been a couple months. Between people in the family having surgury and/or putting in a bunch of posts around the garden - I havn't made much progress on the project. But I do read all the posts here each day for motivation ! Thanks !!!
Purchased a BER 2002 convertable vette chassis a while back and have it setup on the jig now with all the suspension in place. Amazed that someone would burn a vette for the insurance - instead of drive it - or set a guys vette on fire for revenge - takes all kinds... Took several weekends getting all the burned up carpet, pads, seats, wiring, dash, and what was an endless carbon mess out of the car. Once I got down to the bottom - there was no damage to the composite floor pans - had it been a coupe, it would have melted clean to the ground. No damage to the frame.
Now in the process of the 4 wheel alignment and building the suspension jig. Then the vette chassis gets sold - drop the porsche on the jig and get the whiz wheel going.
The porsche is up on stands with the front suspension stripped out now and just finishing pulling the trans and stuff out of the back.
A little progress each day.... NEVER surrender !
Jim
|