[woody80z28]

Originally Posted by woody80z28, post: 3501675, member: 12782

Started installing the nose. I studded the fenders to make it easier to bolt on. Doing the bolts from the front was always a pain because there was no direct shot to get on them, you had to screw around with a knuckle or bend the urethane. Neither are a good solution... So now it goes on and I can start the nuts by hand. Then they are easily tightened with a knuckle on a long extension.





Fitment at the fender extension kinda sucked, and I saw a post about steel supports that were never on my car. So I fabbed some up out of 1/8". Seems to work pretty well.




Hood gap sucks though. So that's something I need to tackle. Hinges need rebuilding before that though. So I'm drilling and using 1/2" bolts and nuts. Going to tack the nut to the bolt when I get the pivot at the tightness I want.



Test fit the headlight & signal buckets, and grilles. None of them fit great, so they will take a little work too.



But I kinda like that it almost looks like a car!


So now I'm working on getting the spoiler perfect...finishing the last fitment project before tackling the newest one...

post