You will be fine. Its the age old topic that you can't mix 45 and 37 .... It's all B.S.
I've been doing it for 23 years with no headache or returns. Besides those mushroom adapters are aluminum so they will help conform (smash) when you tighten what ever hose end you end up using.
When you mix the two your lessing the contact surface between the 2 different degrees. Dose'nt mean they wont work. Just make sure your surfaces are good and clean before assembly.
If you feel it wont work I sell extreamaly soft copper conical seals that will conform (crush) the 2 tapered surfaces to full contact.
Mark
|