I got the radiator support in on Friday and we installed the intercooler tank where the battery used to be. Now we're figuring out the hoses and fittings I'll need to plumb the heat exchanger.
We bolted the converter to the flex plate, man theres not much room to work doewn there. The trans cooling lines are connected to the trans and the other ends are ready to connect when I re install the trans cooler.
We cut the fuel hoses to legnth and installed the XRP fittings. I need to send them out so they can get crimped. I'm looking for someone with the XRP crimper to do them. We are trying to get a -16 90 degree fitting on the end of the HX hose. It's kicking our butts! we tried without success and decided to cut the hose end and get a fresh start. Still nothing. Tomorrow we try again. Wish for me to have the patients to not screw up the fitting, They don't make them anymore!
|