cat
Thanks for the response guys. I will try and get some measurements as far as how low it is and try to compare it to stock. The subframe is a 1 inch drop plus another .5 inches in subframe bushings. Although you cannot tell in the photo, the only thing that you can see hanging below the rockers are the DSE subframe connectors. The exhaust when built will be the lowest part of the car. I am guessing about 4.5 inches at the lowest point. You cannot run a stock 1st gen suspension this low without it having about 1 inch of travel or less.
The color is going to be yellow. After seeing Steve's new 68 I almost went with that color, but I have been saying for 3.5 years it is going to be yellow so there you have it. I will be running an SS hood as well.
|