Quote:
Originally Posted by NOT A TA
Narrow plates on passengers side and holes are slightly off center so you can flip them end to end or top & bottom for better fit against the short right angle lip on various cars. Wide ones on drivers side. The one notched for the wiper recess there is only one way it fits. Note bolt pattern for top plate in pic below so it lines up with the notched bottom plate. And be careful not to drop a nut down the side of the cowl. If you're short bolts I fear you tried to put a wide plate on each side. They're designed to get the most support we can without interfering with the stock plastic cowl screen or the 70-76 hood/cowl gasket.
 |
Man, I need these... I still have my orginal (non-adjustable) G-braces.
GREAT products you've developed my friend!! Filling a much needed niche for our cars!
__________________
Ty Ingle, USAF Retired
FREEDOMBIRD
Hoodpins.com, Inland Empire Driveline, Billet Accessories Direct, Modo Innovations, AutoRad Radiators, Morris Classic Concepts, Marquez Design, Anvil Auto, Fesler Billet, US Collision (DOOM), AGR, Pro-touringF-body.com, Phoenix Transmission Products, Shiftworks, ACC Carpet, Hedman Hedders, BMR Fabrication, American Autowire, MityMounts, TIN INDIAN Performance, Kauffman Racing Equipment, Pypes, RobbMc Performance, WMC, Holley, NOS, PST