Quote:
Originally Posted by Sonar Chief
 Keith, a properly bonded part is stronger than a welded part ... the bonded sheet metal will tear before the bond gives whereas the spot weld will give way under tension. I did weld areas recommended as per the instructions.
To be a leader you need to innovate 
Got the tunnel mods done, check that off the list ....
After the adhesive cures I'll finish off the tunnel mods from the bottom, still needs some material trimmed off, left it long on purpose!!!
Thanks for looking ... |
I used the same Speedtech tunnel cover and 3M Panel Bonding adhesive (
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1) B/c my interior is finished and didn't want to risk any rogue sparks. Sure wish I had the chance to do the work without the T56 installed, made cutting the tunnel extra stressful.
Looks great!