View Single Post
  #3  
Old 02-18-2017, 02:52 PM
mitch_04 mitch_04 is offline
Senior Member
 
Join Date: Oct 2012
Posts: 195
Thanks: 0
Thanked 1 Time in 1 Post
Default

I think I have smoked roughly 30-50 of them, and only 2 haven't needed gaskets. If you know someone who smokes, just have them puff one into the fuel pressure regulator vacuum line. Not quite as efficient as a machine, but usually will do the trick. Then again, for $20, it's hardly worth it. They are so easy to do.

Keep an eye on your knock sensors and harness, they often break the wire right above the seal. I usually pop the seal and wire off, the rear sensor is often corroded and prone to failure. Of course, you can always just pull the intake again if they go out.
Reply With Quote