Moog part number 5536, will yield about a 500 inlb rate at a 14" free length.
I estimate the spring must be cut to 14" free height to equal a stock Camaro height, but this is just a guess. The rate should be around 500 lbs. One end of this spring is like a stock Camaro spring and the other is different. You must cut the non stock or 'pigtail' end. It kind of depends on what you are going to run for an engine, to really get an idea on ride height.
If you were cut them to 13.5" free length, it would yield around a 540-560 rate.
These are available thru WABBCO, in Kerney Mesa, for roughly $68.00/pair.
Last edited by chicane; 10-30-2006 at 01:55 PM.
|