Brakes
Ok so I just got back from testing after a couple of hours of checking the adjustment on the e-brake system, running through the steps to make sure things are adjusted up where they should be and gravity bleeding the rears. Didn't seem to change anything so I'm assuming everything was working like it should. So next step is removing the prop valve from the rear line altogether and buying better pads for the rears.
One other thing that I hadn't mentioned before is I have 1/4" tubing coming out of the m/c and running back to the rear and only 3/16" for the fronts. I wonder if that might skew things a bit? It's the way the original lines were laid out but maybe that needs to be adjusted as well.
Robert
|