Not a bad idea on the catch can, Woody. I may need to look into that addition.
I have the engine at the machine shop. I'm running Mahle +5cc valve relief pistons. Going to have the block decked so the piston is 0.013 to 0.015 inches in the hole. That will give me a quench right at 0.040 inches with the head gaskets. Engine won't be back until the end of April.
Thanks!
__________________
Trey
Current rides: 2000 BMW 540i/6 and 86 C10.
Former ride: 1979 Trans Am WS6: LT1/T56, Kore 3 C5/6 brakes, BMW 18in rims
|