Quote:
Originally Posted by preston
Hm I see Ron has you putting the shock witha fair bit of side view tip back, it seems to be lined up with your caster/anti-dive angle - must be at least 1.5" behind FACL on the chassis mount ?
I'll have to ask him about that as he put mine pretty straight up and down from the side angle.
|
Yep, been a few people with Ron front ends that have noticed difference between what they have and mine. Remember these are built different for each car. My track width is pretty wide, so my control arms are longer than most. I assume geometry takes precedence and the coil over simply mounts how available. In my case, the lower coil mount is a pretty good ways out there, and it becomes a matter of simply mounting the coil over where the spring clears the inside of the upper arm. I know the angles and will calculate my spring rate once I have it done and scaled.