[Neil B]

So here is attempt #4 at my power steering system. I chose a new reservoir from a company called Chase Bays who specializes in fluid transfer products for BMW and other import cars. They were the only company that made a reservoir with the baffling and size/dimensions I was looking for. It's a nice piece. This reservoir allowed me to get the suction line further away from the control arm and also place the steering box return line on the bottom of the reservoir. I also replaced the stainless PFTE pressure line with a rubber/swedged fitting setup. I had high hopes. The foaming/aeration problem seems better, but the fluid is still getting way too hot and the pump starts to groan when the engine comes up to temp. With this being a track car, I just bit the bullet and ordered a Derale stacked plate fluid cooler which I am going to mount in front of the radiator. This should add significant fluid volume in addition to the cooling unit itself.