[Z06vette]

Well, couple things going on there. Looking at the pic from the top, the mount isnt in line with the throttle arm. I have used that mount on several builds, as well as the cable. The mount is designed (i think) for use with factory TB. You will have to extend it out from the intake. Make a spacer, possibly. The factory 98-02 F body bracket might actually work well. It has 2 notches, the outer one being for the cruise control cable. That might line up better. Looking at the pic from the front, the mount is adjustable and needs to be rotated so the cable comes out in line with the top of the throttle arm. The cable should be in a straight line between the mount & arm. The last thing is there is too much slack in the cable. The mount has an adjuster to take up the slack. Loosen the jam nut, and back out the threaded bolt the cable runs through. There should only be a slight bit of free play in the cable. I hop this makes sense. Scott