I have to say, those steering bolts were the hardest bolts I have ever had to take out in my entire life. Heat, impact gun, and PB blaster did not touch it. I had to use a sledge hammer to knock the bolts out. Lots of swearing, but they came out. Here are some pictures of before and after paint. Will get them on the new spindles tomorrow. Also, here are some pictures of the ridetech setup in front. The coilovers are not installed yet as I am waiting on different springs. I have to also find a new bolt for one of the lower control arms as the bolt came with some crushed threads. I am also missing all the hardware for the rear coilover setup. I have all the brackets, just no bolts, nuts, or washers. I am happy with how the color of the spindles turned out.
Also, I have small block motor mounts, the ones that attached to the frame. I have read mixed opinions on if these can be used with a big block or not. Any opinions? I would like to get these installed soon as I feel they will be a pain to do later on.
