Latest update on the SS - I installed the LED DRL harness from Gen5DIY.com.
This harness allows you to enable the DRL LED's to run all the time.
They will run with the low/high beams on - and even work when the foglights are on.
The install is pretty straight forward - take off the front bumper off of the car. Unplug the foglight/drl sub-harness from the bumper - and install the Gen5 harness - the plug the sub-harness back in.
Run the Gen5 wiring through the bumper - passed the radiator - and up to the fuse box.
Take off the fuse box cover - and remove the 20 amp fuse in slot #51. Plug in the Gen5 Add-A-Fuse plug into slot #51.
Trim the box and the cover to allow the harness to lay flat - and put the fuse box cover back on.
Parts used:
Gen5DIY LED DRL Harness
For more information please watch my video below:
Follow me on Instagram:
https://www.instagram.com/bonecrrusherss
Follow me on Twitter:
https://twitter.com/bonecrrusherss
Like me on Facebook:
https://www.facebook.com/bonecrrusherss