Quote:
Originally Posted by JSM
I was hoping to be posting pictures by now of finished machined parts but in my tireless efforts  to make this part PERFECT the first time, I have delayed and need some help from the members here on Lat-G.
What I am looking for are some pictures of your current Big Ford Ends, but please note I am ONLY needing pics of "New Style" aka "Torino Ends". What I need pictures of specifically, are pics from the backside of the End (the side the T-bolt/bolt enters from. If you also would not mind at time of posting, I would like to know what "brand/who made it" if you know, but not necessary.
Hopefully you all can give me a quick hand with this  It would be greatly appreciated!
Jay |
Quote:
Originally Posted by 4mul8ion
Hope this helps. These ends were from Dutchman.
 |
THANK YOU! That is exactly what I am looking for. Dutchman makes great stuff. They are also onboard to make axles for this set-up too!
Hey everyone,,,,,, please keep the pics coming. Ideally I would like a pic from each manufacturer if possible.
I am trying to verify the distance of the 4 bolt holes in relation to the outer bearing bore. I thought this would be a given that all Ends have enough room for a socket head cap screw at minimum, but just came across one set that did not and would only fit a T-bolt! NOT what I want to see and want to prove that it was an oddball..... Need to make sure that ALL or majority of "Ends" out there in the world have room for a socket head cap screw at minimum. Either way, it is not a deal killer as I have a "plan B" for those rare cases,,,, but want to verify that majority are as you just posted up in the picture above.
Also curious to see what is out there for the outer shape of the Flange itself, but most all manufacturers seem to be the same/similar.....