Quote:
Originally Posted by 4mul8ion
Hope this helps. These ends were from Dutchman.
 |
Quote:
Originally Posted by JSM
THANK YOU! That is exactly what I am looking for. Dutchman makes great stuff. They are also onboard to make axles for this set-up too!
Hey everyone,,,,,, please keep the pics coming. Ideally I would like a pic from each manufacturer if possible.
I am trying to verify the distance of the 4 bolt holes in relation to the outer bearing bore. I thought this would be a given that all Ends have enough room for a socket head cap screw at minimum, but just came across one set that did not and would only fit a T-bolt! NOT what I want to see and want to prove that it was an oddball..... Need to make sure that ALL or majority of "Ends" out there in the world have room for a socket head cap screw at minimum. Either way, it is not a deal killer as I have a "plan B" for those rare cases,,,, but want to verify that majority are as you just posted up in the picture above.
Also curious to see what is out there for the outer shape of the Flange itself, but most all manufacturers seem to be the same/similar.....
|
Quote:
Originally Posted by 4mul8ion
Here's the Dutchman outer shape.
 |
Thank you. I appreciate you taking the time to help out.
Looks like your Dutchman ends have "flat sides" as opposed to moser/strange ends that seem to all have a radius in that area. Yours match the ones that are modeled in my CAD pictures. I have already changed the drawings to accommodate the radius version which will easily work with your/others "flat sided" ones.
One other thing I am curious to hear from everyone is if their current ends have accommodations for an "inner seal". Not all ends do,,,, but many do have and most all new ends are coming with this feature.... If you do have, it will be the bore closest to the axle tube and the bore should measure approx. 2.50-2.502" and have a small machined seat area at the bottom for the seal to bottom out on...
Again, thank you.