[bonecrrusher]

I was having issues with my fuel tank system - and wanted to make dropping the fuel tank easier.

I decided to drop the transaxle out of the car - and with that gone - I was able to not only fix the fuel system - but I also decided to upgrade the clutch while I was in there.

The stock LS2 clutch only had 50k miles on it - but I decided to upgrade to the LS7 clutch while it was apart.

With the car torn apart - I also replaced the throwout bearing/slave cylinder, and installed a Tick Performance Speed Bleeder while I was in there.

Parts Used:
GM LS7 Clutch http://amzn.to/2r1DFDO
GM Input Bearing http://amzn.to/2rP79c2
Tick Performance Speed Bleeder http://amzn.to/2rZAT6Z
Powerbuilt Flywheel Tool: http://amzn.to/2u1PFuk

Please watch my full videos below about this swap:




Thanks everyone for all of your support!

Send me stuff!
Craig BonecrrusherSS
PO BOX 63
Denver, NC 28037

Purchase Stickers here:
https://goo.gl/JQTfC4

Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss