This project was started back in 2013 but stalled while we built our 2nd Gen Camaro. Now that the 2nd Gen is complete and getting beat on it was time to get back onto the C10. The only problem now was R&D had other product related projects going so they had little to no time to devote to the project. Not wanting to let the project sit any longer I worked out a deal with Ed & Sal. They would make me project manager and give me plenty latitude to build it as I seem fit. A decision they will soon regret.
We are still trying to decide on a name for the project.
January 2014
February 2014
The first articles have had a few revisions through development but we're getting close.
Here, Ed is changing the anti-dive angle to 7.5.
A quick tack weld
We also revised the crossmember. We raised it up to frame another inch and put a degree tilted back.
Ed installing the upper plate onto the frame to confirm some simulations.
April 2014
More mock up pieces and parts
The crossmember is now in its 3rd iteration of the original idea.
