Quote:
Originally Posted by slenning
Something else I've been working on. I wasn't figuring on a back seat anyway so I figured I'd "borrow" an idea a few others had done. I cut out the back of the seat area to make a full "firewall" and am building a compartment to replace the seat. My plan is to have the battery and maybe the fuse panel, etc. in here.
Think I'm going to put some stainless mesh behind the dimples.
Have the pattern made and plan to cut the top out of 1/8 aluminum on the waterjet. Will cut two doors out at the same time and already have an aluminum continuous hinge to mount them.
 |
I'm doing the rear seat delete in my 69 Camaro. I've got the riser welded in, just kind of stuck on how I'm going to do the access doors (panel)
Waiting to see how your doing yours, I know your going to have a much better way of doing yours.