Quote:
Originally Posted by dhutton
As far as I know the short arms are not reproduced. The medium arms are reproduced.
Don
|
What he said.
How bad is it hitting?
What wheels are you using? Are they cast or forged? Can the backspacing be changed?
If you decide to go with the short z/28 steering arms, measure what you have first to verify the shorter arms will solve the problem.
Can you shim the steering arms a 1/16" or 1/8"?
I'm running AFX spindles, Forgelines 18x8 4.875" BS with Z/28 arms and I have about 1/2" clearance between the wheel and outer tie rod end. My car hasn't had the front end aligned, but I don't think it's off that much.