Getting closer to being able to pull the motor out. 90% of the wiring is disconnected and I'm working on taking apart the intake to get at the fuel rails and a couple of electrical and vacuum connectors underneath the plenum (man this Super Ram has a lot of pieces and bolts!)
One issue I need some help with is my transmission crossmember. The bolt holding the torque arm to the crossmember is interfering with the tailshaft on the T56... whoever installed it just cut a piece of the bolt head off to make it work. I'd like to do a better job when this stuff goes back in. If there are any third gen Camaro guys on here who can help me ID this crossmember and what needs to be done to make it work that would be awesome. I'll ask around on the third gen specific forums as well.
Here's the best picture I could get of the bolt hitting the tailshaft:
