4th gen drive shaft fit 3rd gens? Should be able to pick one up cheap if so.
You need to be on frrax.com if you're not already. Great site for making fbodies handle.
That looks like a de-coupled TA. That's a serious piece if so. My guess is it was never designed for a T56 only the T5 and 700R4 found in 3rd gens. Honestly, I'd cut the rearward mount off the bottom of the tail housing. Those mounts are were the 4th gen TA mounted to the trans. You could probably slice it at an angle from the side so it doesn't hit the bolt any more and call it done.
__________________
Trey
Current rides: 2000 BMW 540i/6 and 86 C10.
Former ride: 1979 Trans Am WS6: LT1/T56, Kore 3 C5/6 brakes, BMW 18in rims
|