After driving a little more this weekend, it was apparent that the rack needed a little more tweaking.
I jacked it up tonight after work, and found that the preload on the front wheel bearings was just a little loose. That was a bit of a surprise, so I tightened up that a bit more.
Next was onto the steering rack, and adjusted it a little more.
After taking it for a test drive, I think it is really close now. I might have to adjust the toe in a little. I set it at 1/16 but it feels like it might be at zero.
I also want to review the caster and camber, just in case.
I have a bit of a line leak, that is introducing air into the system, and causing a little bit of steering pump groaning noise. I think I have one tracked down, and will try and see if I can find other possible leak areas tomorrow night
|