I had a similar problem with my stock sub-frame using a steffs oil pan. I had to switch to the milodon unit. I also have a stock camaro SS 396 and measured the oil pan and it is the same size in the area you are having trouble with as my milodon unit. What is the distance from the block to the mounting point on your motor mounts? I am using the prothane mount and its 2 and 1/2 inches. I measured a set of moroso solid mounts and they are only 2 inches. Maybe you could use the taller prothane mount and use some washers between the mount and the block to get the clearance you need.
Last edited by PSV; 11-11-2006 at 08:54 AM.
|