[rickpaw]

Originally Posted by joeko23

Hey check out this video sounds like you have this problem. All our MC are angled so there will always be some trapped air unless you bench bleed the mc
https://m.youtube.com/watch?v=s6cVYgzCU18

Hi Joeko23,

I did bench bleed the m/c (sort of). As I mentioned in previous posts, I plugged the line from the m/c, removed the mc (as a unit with reservoir/line). The push rod was rock solid. I couldn't move it at all.

I knew when I unplugged the line and connect to the slave, there will air reintroduced into system. Guess I'll keep bleeding it.