[Ron Sutton]

This dyno sheet is Greg's engine. It is our "Track Warrior 3 LS7".



You can see a detailed list of all the internal components in our catalog HERE.

Three things should stand out ...
1. The build components are almost overkill for "only" 700hp. That's to increase longevity.
2. The ARE dry sump is simply the best dry sump & best protection for the engine in a car with high G's.
3. The power curve is relatively "linear" which makes these engines easier to drive fast.

A few other notes:
A. The "dead on" dyno at Scoggin-Dickey shows 707hp. It will make 8-11 more horsepower once we we change the oil from Driven BR break-in Oil to Driven LS oil.
B. We did NOT dyno the engine with step headers. If we did the top end power would be the same, but the power band from 2500 to 6000 would show higher & even flatter.
C. Greg's headers are the RSRT "tuned" Step Headers ... 1-3/4" to 1-7/8" to 2.0" and will have more power from 2500 to 6000 than the dyno curve shows & be even flatter.
D. This same engine with the very basic, single stage GM OEM LS7 dry sump makes about 15 less HP.
E. The happy window power curve on this particular Track-Warrior engine is 2500-7500rpm on track.

Front end, hood & doors mount this week. Powertrain next week. Still on track to track test June 28th.