Quote:
|
Originally Posted by race-rodz
this is the hydro flare tool i have, i ordered an extra cone and 3/16" female die set, then remachined them to a 37* flare specifically for doing stailess line with AN fittings. for larger AN fitting on alum fuel line...i use a regualr ole manual 37* flaring tool
the tool also works great on mild steel brake lines doing double flares, and the "bubble" flares have actually come in handy a couple times.
|
Thanks! That is good tip!!
Quote:
|
Originally Posted by ProdigyCustoms
Aeroquip had some killer looking benders on display at SEMA
|
Sounds intresting.Ill try to find more info.
