Also got the McLeod's hydraulic clutch conversions mocked up. I didn't take pictures but I welded a bracket to mount the safety neutral switch (which I will use the old brake switch - going thru a relay)
With the mechanical stuff sorted out, I turned to clean up the wiring under dash.
Added connectors to switches/gauges/lighting so that I can easily remove them later - here's one of many connectors.
I had a Tanks Inc fuel tank, but during the USCA event, I had to keep it half full to maintain the fuel inside the baffle. So, I sprung for the new (at the time) Rick's restomod tank with 5th-gen pump/corner pick up.
Added GT280 connector to the fuel pump leads.
