Quote:
|
Originally Posted by JoshC
What do you guys think about taking a piece of 1"x3"x(the proper length) bar stock and bolting it to the existing two holes - have two holes drilled approx. 1.5" in the bar stock below the two original holes. Essentially moving the R&P one inch out and 1.5" down? I have a new ididit steering column to put in as well. Notching the oil pan is still an option but this may be cleaner and certainly easier for me. And I even have some of the red paint left for the bar stock if it works. 
http://img148.imageshack.us/img148/8653/1030689iv3.jpg |
I don't think you want to go moving the rack around, may alter the bumpsteer characteristics etc...