[CJD Automotive]

Built the oil tank mount:




And the column mount. Of course a bar is right where I need to mount the clamps to center the column to the seat, so made this standoff piece:






Then on to the pedal mount:





I made the mount will multiple holes, slugged and welded, to allow fore/aft adjustment. You'll notice the column is "inside" the mount with the brake pedal to the left side. This is to allow me to spread the pedals a little wider and keep the accelerator far enough away from the trans tunnel to clear my big ass feet:




The line on the yellow tape is the seat centerline. I set the column and brake pedal to this line. I have the pedals spread for my size 12 4E clown feet!