Quote:
Originally Posted by carbuff
Since I have the Extreme subframe from SpeedTech now, I can attest to how hefty that LCA is.
One thing I spoke with both Ron and Roger at SpeedTech about that I liked from my previous JRS setup was the spherical bearings in the control arms. There is a lot of friction (Ron calls is stiction) when you go to move the arms with no spring/shock in place. I've thought about making a set of my own, it wouldn't be that hard. Aftermarket kits are available for the C5/C6 to do exactly this, but they are stupid expensive. You can get the high quality bearings for < $50 each (I did for TOW). 8 of them gets you to $400. But its the sleeves and standoffs which will take the machine time. Anyway, I digress...
!
|
we have built a couple prototype uca and lca with bearings in them. it is more work and more machining. we were going to offer them as an upgrade to the current arm but honestly other that talking it over with Ron you are the first one to mention it. so that being said does it make "Cents" out of dollars ? or the other way around