Small update after a little while. I got the frame pretty much built up now.
I installed the Speedtech/Dutchman floater rearend. Waiting on the rear brake caliper brackets, then I can install the Corvette parking brakes. I had Speedtech take out the 12MM studs on all four corners and put in longer ARP 1/2" studs. The StopTech rotors and the Forgeline RB3C Concave rims are on there for mockup for measuring overall width to make sure everything will fit to the body and just because I wanted to see it all together!!! All four rims are 18X11 and I will be putting 315's on all four corners. I did satin black on the inner hoop/spokes and transparent smoke on the outer. I like how the transparent smoke looks....no polishing all the time here!
|