Reworked the stock dipstick that sticks up way too far. I feel this looks better being a few inches lower.
[IMG]
Dipstick by
Jeremy Haddox, on Flickr[/IMG]
The A/C bulkhead that came with the Concept One system was really nice, but it just wouldn't fit in the tight engine compartment and the A/C lines would never look right. So after searching I found this bulkhead and shortened the lines and welded the fittings back on.
[IMG]
AC bulkhead by
Jeremy Haddox, on Flickr[/IMG]
Then had it coated
[IMG]
AC bulkhead coated by
Jeremy Haddox, on Flickr[/IMG]
Hope to have a few more updates soon.